PDU response timer/Generic Timer (MMMS mode)
| PDU_RESP_TIME_VAL | Non MMMS mode: This register is loaded with the count value to monitor the time to get a response for a PDU from peer device. Firmware starts the timer by issuing the command, RESP_TIMER_ON, after it has queued a PDU for transmission, that requires a response. If a response is received, firmware stops and clears the timer by issuing the command RESP_TIMER_OFF. If this timer expires, it results in hardware closing the connection and triggering a conn_closed interrupt. The discon_status field in the Connection status register is set with the appropriate reason. Units : Milliseconds. Resolution : 1.25 ms MMMS mode: This register is loaded with a count value, which when matched by the internal timer, triggers the GEN_TIMER_INTR. This is recommended to be used as a one shot timer and not as a periodic timer. Firmware starts the timer by loading the expiry time and issuing the command, RESP_TIMER_ON. Once the timer expiry is triggered with the interrupt GEN_TIMER_INTR, the firmware stops the timer by issuing the command RESP_TIMER_OFF. Resolution : 625 us |